Home / Blog Center / Chargers / How to Replace the Panel Light in Your Heat Bath Heater
06/01/2025 | Hawkrown
Now that you are renovating the bathroom, most homeowners choose to install a warm-air bath heater combined with lighting. Due to its complex structure, when a malfunction occurs, it's often unclear how to replace the panel light in the warm-air bath heater. Let’s take a look.
How to Replace the Panel Light in a Warm-Air Bath Heater
1. First, use a tool to pry open the edge gap of the cover plate, then remove the cover plate. Observe the type of light fixture and purchase a replacement of the same type and specifications.
2. After removing the cover plate, if it’s a carbon fiber heating tube, locate the card slot, press it inward, and the glass tube can be taken out for replacement. Simply press it back in during installation.
3. If you find a lighting tube, you can directly pull it out from the card slot, then insert a new lighting tube.
Common Faults and Maintenance Measures for Warm-Air Bath Heaters
1. If the warm-air bath heater is functioning normally but produces abnormal noises during the operation of the warming or exhaust features, it is likely that foreign objects are stuck in the rotating shaft or it has rusted. The user needs to disassemble the device and check the internal situation, clean out any debris, and apply lubricant on the rotating shaft to ensure smooth operation.
2. The warm-air bath heater operates using a motor, so if the motor malfunctions, the entire device will not operate normally. When this issue occurs, it can be quite troublesome, and it is advisable to hire a professional to inspect the motor, diagnose the fault, and either repair or replace the motor.
3. If the lighting fixture works normally but the exhaust fan does not, it is likely that the starter coil is faulty. In this case, it cannot drive the fan to operate, and the user needs to use a tool to spin the fan blades or replace the starter coil.
Editor’s Summary:The above information regarding how to replace the panel light in a warm-air bath heater, as well as common faults and maintenance measures, is provided for your reference. I hope this helps you. The overall renovation effect of warm-air bath heaters is good, and their safety performance is relatively high. However, when problems arise, the repair difficulty can be significant, so it’s important to pay attention. If you would like to learn more related information, please follow our website.