Home / Blog Center / Chargers / Easy Steps to Remove a Tight Old Faucet: A Homeowner's Guide

Easy Steps to Remove a Tight Old Faucet: A Homeowner's Guide

08/01/2025 | Hawkrown

Many people have encountered the frustration of being unable to unscrew an item that is too tightly fastened. So, what should you do if an old faucet's sealing tape is too tight to remove? Let’s take a look together.

一. What to do if an old faucet's sealing tape is too tight to remove

1. The tightness may be caused by rust at the connection point. First, check if the connection part is rusty. If it is, apply a few drops of oil at the joint and wait for 5 to 10 minutes before applying more.

2. Next, use a wrench, or a 300 or 450 spanner to unscrew it. If it’s inconvenient to disassemble, first use pipe pliers to remove the rusty and corroded parts, then slowly tighten the sealing tape. Once removed, the sealing tape cannot be reused, and a new connector must be replaced.

二. How to choose a faucet

1. The surface of the faucet

When purchasing a faucet, start by inspecting its surface. It is advisable to buy faucets with a thicker electroplating layer, as they are less likely to rust in the future. Faucets with thinner electroplating layers may gradually lose their surface over time. When choosing a faucet, look for a surface that is smooth and mirror-like, without any pits or bubbles.

2. The weight of the faucet

A simple method to assess the quality of a faucet is to check its weight. Most faucets on the market are made from brass, which is quite heavy. When buying a faucet, it is recommended to lift it and feel its weight—the heavier it is, the better the quality tends to be.

3. Purchase faucets with certification

When buying a faucet, ensure that it comes with certification. Poor-quality faucets can release harmful substances over time, posing health risks. Generally, faucets produced by reputable manufacturers have quality certificates. If a seller cannot provide certification, do not purchase the faucet. It is advisable to choose well-known brands to avoid these issues.

In conclusion, the above information provides insights on what to do when an old faucet’s sealing tape is too tight to remove. For those wanting to learn more, please continue to follow our website for more exciting content to come.

Contact Us

Submission Successful

ok