Home / Blog Center / Chargers / Quick Fixes for a Malfunctioning Faucet: Repairing the Cartridge

Quick Fixes for a Malfunctioning Faucet: Repairing the Cartridge

09/01/2025 | Hawkrown

As we all know, faucets are indispensable items in our daily lives. It can be quite troublesome when a faucet malfunctions. So, how do you fix a broken pull valve in a faucet? Let’s take a look together.

一. How to Fix a Broken Pull Valve in a Faucet

1. Close the main water valve. Locate the red and blue markings about 8mm from the handle, then remove the cap. Use a screwdriver to loosen the fixing screw by turning it counterclockwise, and use a wrench to detach the valve core. Remove the ceramic valve core.

2. Close the main water valve and insert a screwdriver underneath the faucet handle, prying it up from left to right.

3. Close the main water valve and unscrew the blue cap on the right handle. Loosen the screw and remove the handle, exposing the valve core.

4. There is a circle of blue rubber on the bottom of the valve core, with red rubber on the left side and blue rubber on the right side. For the right valve core, install the blue rubber valve core and adjust the direction of the handle before replacing the cap.

二. Things to Note When Installing a Kitchen Faucet

1. Moderate Installation Force

It is important to apply enough force during the installation, but be careful not to apply too much or too little. If the force is too small, the installation may be inconvenient and the faucet may become unstable. If too much force is applied, it may damage the equipment. After the installation is complete, be sure to clean the unit to ensure it does not affect future use.

2. Be Mindful of Your Ability

If small fittings and components are not installed carefully, it can have a significant impact on future use and may even lead to the loss of parts. Therefore, be cautious during the installation process and do what you can. If you are unsure, you can seek help from others.

3. Pay Attention to Water Pipe Cleanliness

Before installing the faucet, pay attention to cleaning the dirt from the water pipes. This is especially important in newly renovated homes, as pipes that have not been treated during renovation may contain residual grit and other impurities. To facilitate future use, start by flushing the water pipe to remove these sediments until the water flow is clear, ensuring that the faucet can be installed properly.

In conclusion, the above information covers how to fix a broken pull valve in a faucet. For those who want to learn more, please continue to follow our site, and we will provide more exciting content for you in the future.

Contact Us

Submission Successful

ok