Should You Install a Heater in the Shower Room or Outside? A Guide to Optimal Pl

A bathtub heater is an essential product for bathrooms, and its installation is very important. If it is not installed properly, it will affect its use. So, should the bathtub heater be installed inside or outside the shower room? Let's take a look!

Where to install the bathtub heater: inside or outside the shower room?

It should be installed outside the shower room. If it is installed inside, it will be affected by water vapor, leading to a damp surface that could damage the product's wiring, affecting its lifespan and potentially causing safety incidents. Therefore, it is recommended to install it outside, which can provide good lighting and heating effects, similar to a space heater. In the winter, it will prevent you from feeling cold while getting dressed.

What to pay attention to when using a bathtub heater

1. When installing the power line for the product, do not use open wiring; instead, it must be installed using plastic conduits covered and placed within the wall. Additionally, waterproofing must be ensured.

2. It's important to pay attention to the installation height, keeping it at least 10 cm away from the ceiling to prevent potential burns to the skin. Moreover, it should be installed in the middle position to ensure effective heating.

3. During use, the time for each session should not be too long, as the infrared rays emitted can harm the eyes. Therefore, to ensure the safety of users, the duration should be controlled.

4. The bathroom should be well-ventilated, especially after taking a shower when humidity is relatively high. Promptly opening a window can prevent the heater from getting damp and damaging the product. Additionally, do not close the window immediately; wait until the moisture has dissipated before shutting it.

5. Also, avoid spraying water directly at the heater with the showerhead, as the internal components are not waterproof. If water enters, it could lead to a short circuit and damage the heater.

6. When using the heater, try not to turn on the heating lamp and the lighting lamp simultaneously. Just turning on the heating lamp will suffice, which prevents wasting electricity.

In summary：the above provides information on whether to install the bathtub heater inside or outside the shower room. I believe everyone understands now! There are many issues to pay attention to when using the bathtub heater, as improper use can lead to product damage. It is recommended to refer to the guidelines mentioned above during use.