Ultimate Guide to Installing Your Electric Toilet Seat

Electric toilet seats are popular among consumers due to their diverse functions and user-friendliness. So how do you install an electric toilet seat? Here’s a brief introduction.

How to Install an Electric Toilet Lid: A Complete DIY Guide：

1、Check the Product

Before installing the electric toilet seat, first measure the dimensions of the toilet seat to ensure it fits the toilet bowl properly. Also, verify the related components of the electric toilet seat against the instruction checklist to ensure that all parts are complete and undamaged. If any parts are missing or damaged, contact the seller for a replacement.

2、Preliminary Preparation

Installing an electric toilet seat typically requires a power outlet. You can use a power tester or an electrical pen to check whether the wiring for the outlet is correct. If the wiring is incorrect, you need to dismantle the outlet and reconnect the wires according to the requirements. Additionally, turn off the toilet's water valve to prevent water from flowing out during the installation. Lastly, prepare installation tools such as a screwdriver and a wrench.

3、Install the Toilet Seat

Before installing the toilet seat, you can clean the toilet with a cloth. Then, remove the fixed mounting bracket from the toilet seat and insert the plastic expansion plugs into the mounting holes of the toilet seat. Next, place the positioning card as required on the toilet, and then position the mounting bracket of the smart toilet over the cutout in the card. The next step is to place the adjustment board in the corresponding position on the fixed bracket and insert screws to tighten them. Finally, align the toilet seat with the fixed mounting bracket and push it in, adjusting the installation position as needed.

4、Install Other Accessories

Use a wrench to detach the soft hose from the toilet’s water valve, then screw the toilet filter into the water valve connection. Reconnect the detached hose to the filter inlet. Lastly, connect one end of the one-way valve hose to the filter and the other end to the toilet seat. When installing, make sure to pay attention to the direction of the one-way valve; typically, the arrow on the valve should point towards the toilet seat.

In summary：this is a simple introduction to installing an electric toilet seat. I hope that this article helps provide reference and assistance for your future installations. To learn more about related information, feel free to continue following our website.