Home / Blog Center / Chargers / Why Does My Wall-Hung Boiler Burn for Only 10 Seconds and Then Stop
27/06/2025 | Hawkrown
On the off chance that a wall-mounted evaporator is utilized for a long time, it is simple to come across a few flaws that cause it to not work appropriately. So, what are the reasons why the wall-mounted kettle burns for 10 seconds and after that stops, and the return water isn't hot? Let's take a see.
Reasons why the wall-mounted kettle burns for 10 seconds and after that stops, and the return water isn't hot:
1. It may be a setting issue. On the off chance that the temperature is set as well moo, the kettle will work for a whereas and after that halt warming once it comes to the set water temperature.
2. There may be a blockage within the pipeline, causing neighborhood overheating of the wall-mounted kettle, which leads to the evaporator halting warming.
3. It might moreover be a blame inside the kettle itself, such as issues with the circuit board, gas valve, or indoor regulator, causing it to work for a whereas and after that quench.
Contrasts between wall-mounted boilers and gas water radiators:
1. Distinctive purposes
Wall-mounted boilers can give both warming and hot water, whereas the last mentioned can as it were give hot water. Since of their diverse employments, they are utilized in numerous circumstances.
2. Distinctive capacities
Wall-mounted boilers are warming gadgets primarily utilized for warming, though gas water radiators give hot water, commonly utilized for family showering.
3. Distinctive control
The control of these two gadgets shifts. The previous contains a higher control than the last mentioned, so in terms of giving hot water, the wall-mounted evaporator is more adequate.
4. Distinctive establishment
Wall-mounted boilers are compact and can be specifically hung on the divider without influencing aesthetics. In utilize, the temperature can be balanced and controlled autonomously. Gas wall-mounted boilers have different sorts; a few can be wall-mounted whereas others can be put specifically, so establishment strategies contrast.
5. Diverse water temperature control
The water temperature of gas wall-mounted boilers can be preset, and the evaporator will alter the fire measure concurring to the temperature. In spite of the fact that numerous gas water radiators presently moreover have water temperature control capacities, their execution is still not as great as wall-mounted boilers.
Editor's rundown:The over substance is almost the reasons why the wall-mounted evaporator burns for 10 seconds and after that stops, and the return water isn't hot. Ideally, it'll be supportive to everybody! The execution of wall-mounted boilers is exceptionally great and incorporates numerous capacities. Be that as it may, clients ought to pay consideration to legitimate utilization to dodge harming the evaporator.